mitsubishi pajero or shugun tensioner pulleys

[BJ]

Hi,
anyone know where i can find the tensioner pulley and the other for a 3.0ltr V6 (Pajero SWB 1991) ???? for some strange reason the prev. owner did them up so tight they have destroyed the bearings.... by luck the alternator is new and the bearings dont sound bad.

I'm haivng a look around my local scrap yard this weekend anyone know of any other cars pulleys that would fit ??


cheers
Joe

[LePaj]

can't you replace the bearings?

[BJ]

Thats what i usally do but they are sealed and i can't get em out !!!

[markbass]

if its any thing like the air con tensioner pulley on the 2.8 then its a case of tapping the 4 little indents out of the way prise out the washer and tap the bearing out from the back the new bearing for the tensioner on mine was about 7 quid

that is assuming its the same as an air con belt tensioner

[LePaj]

failing that give Phil a call he's not far from you! www.filspajeroparts.co.uk (http://www.filspajeroparts.co.uk)

[markbass]

did you resolve this issue as ive got the same problem noisy bearings and you are right they are sealed on the v6 totally diffrent to the 2.8 desiel type

ps carl does phil have any petrols down there at the mo :?: im after mitsubishi shogun 3l v6 auxillary drive belt tensioner pulley and the idler pulley

[kalross]

I posted some useful info in respect of this here:

http://www.pocuk.com/forums/viewtopic.php?t=114696

Kal