PDA

View Full Version : HD Surface Mount D Rings


Hoppie
23-07-2007, 08:08 PM
where can i get some of these as i just relised the fronti hasnt got a rear recovery point since the mods have been done :lol:

http://i33.photobucket.com/albums/d74/Hoppie4x4/wescoperformance_1959_385840.jpg
Dan
23-07-2007, 08:17 PM
I don't know where you can get those but it doesn't look up to the job. That looks more like a load lashing eye for a trailer.
Hoppie
23-07-2007, 08:24 PM
there ment to take up to 16000lbs
Dan
23-07-2007, 08:31 PM
:shock: I'd be amazed if they did. Those square holes look like they are made for coach bolts which suggests it's intended to be bolted to wood. If you look at the rough finish of the metal it looks to be made from low grade material too.
Hoppie
23-07-2007, 08:33 PM
any alternative idears then :lol:
Dan
23-07-2007, 08:37 PM
There is loads of things. Give me an idea of what you have to attach to. Standard "towbar" bolt holes?
Hoppie
23-07-2007, 08:41 PM
http://i33.photobucket.com/albums/d74/Hoppie4x4/07072007171.jpg


how about these
http://i33.photobucket.com/albums/d74/Hoppie4x4/clevis-mounts.gif
Dan
23-07-2007, 08:45 PM
how about these
http://i33.photobucket.com/albums/d74/Hoppie4x4/clevis-mounts.gif

Top banana, properly rated shackles, just the ticket. :D
The only thing to better them would be swivel ones which ensure that the shackle is always being pulled in the right direction :D
Hoppie
23-07-2007, 08:47 PM
just found some on scorpian racing :lol:
http://www.scorpionracing.co.uk/OFFROAD/Products%20images/cats/rec/reyes/Sreyesgroup.jpg
91Steven
23-07-2007, 08:48 PM
http://i33.photobucket.com/albums/d74/Hoppie4x4/07072007171.jpg


how about these
http://i33.photobucket.com/albums/d74/Hoppie4x4/clevis-mounts.gif

Neat rear end there mate :lol: :wink:

Is that a fronty?
Hoppie
23-07-2007, 08:50 PM
yes it is the part finished project is here
http://www.plcuk.co.uk/viewtopic.php?t=9521
Dan
23-07-2007, 08:51 PM
just found some on scorpian racing :lol:
http://www.scorpionracing.co.uk/OFFROAD/Products%20images/cats/rec/reyes/Sreyesgroup.jpg

You best give the bank a ring and extend your overdraught if your buying off scrapion :wink: :wink: :lol: :lol: (good products though)
Hoppie
23-07-2007, 08:54 PM
i will look around now i have decide what i want :lol: :lol:
hutchy
23-07-2007, 09:04 PM
take a look at this :wink:

http://www.firstfouroffroad.co.uk/towing.htm

might give you an idea or 2
mule
23-07-2007, 09:06 PM
Dave try Safari Engineering at Yatley he has some on the shelf phone number is 01189732732
Hoppie
23-07-2007, 09:09 PM
take a look at this :wink:

http://www.firstfouroffroad.co.uk/towing.htm

might give you an idea or 2

was just looking at that page

:lol: :lol:
'Tested' Stainless Steel Swivel Recovery Eye with 'tested' Bow Shackle £24.95 ea
Hoppie
23-07-2007, 09:11 PM
Dave try Safari Engineering at Yatley he has some on the shelf phone number is 01189732732

cheers tim will give them a shout :lol:
andy r
23-07-2007, 11:40 PM
Can vouch 4 First four..................top quality stuff and Peter is a good chap, if you are ordering anything from him mention Andy Rennie from Paignton put you on to him, you may not get a discount but he may be more open with you :lol: :lol: after all it's a small planet and we should all be friends
Hoppie
23-07-2007, 11:48 PM
cheers andy :lol: :lol: